PowerTIG 200DV

OVERVIEW
FEATURES
SPECIFICATIONS
WHAT'S INCLUDED
OPTIONS

PT200DV

Sold Out

Lightweight
digital_display
igbt_equipped
1_phase

As the latest addition to the analog line of inverter TIG welders from Everlast, the PowerTIG 200DV features all of the same dynamic performance of the PowerTIG 200DX, but expands its versatility by adding dual voltage and a digitally controlled IGBT inverter. Able to operate on 120V or 240V single phase 50/60Hz, the unit offers maximum go anywhere performance. The unit is definitely portable, and can be used with any generator that is rated for 9000W (240V) surge watts and is certified by the manufacturer as "clean power". If you need a reliable, TIG welder that you can carry with you and make quality welds day-in and day-out, the PowerTIG 200DV is definitely one to consider.

PLEASE NOTE: This machine is fitted with a 15A plug. To achieve the maximum performance out of your Everlast Machine please ensure your current breaker and wiring/socket setup at your place of use is sufficient enough to achieve this. For example you may be required to upgrade your breaker to a 32A dedicated circuit to suit, therefore allowing you to achieve your machines full duty cycle. If in doubt please contact your local licensed electrician for more info prior to purchasing and please see terms and conditions/warranty for more information.

Manufactured and compliant with IEC/AS 60974.10, CE Guaranteeing your electrical safety and performance. INDUSTRIAL USE ONLY

Download PDF Manual HERE

Out of stock

Collections: TIG Welders, WELDERS

Type: TIG Welders

FEATURES

Reliable IGBTs for stable inverter performance
120V/240V Dual Voltage input
Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
Pre flow and Post flow control for maximum shielding gas protection before and after
Color coded controls are easy to identify and understand
Lift start function for use when HF is not desireable
AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
240V Outlet in rear for optional WC 300 water cooler
Pre flow and Post flow control for gas
Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
Pulse frequency ranges from .5-150 Hz in AC and DC mode

SPECIFICATIONS

IGBT Type: Individual IGBT
Inverter Type: Digital/Micro-controlled
Output Type: AC/DC TIG, DC Stick
Voltage/phase: DUAL VOLTAGE 120/240 1 PHASE
Max Rated TIG Amps: @240V: 200 Amps
Max Rated Stick Amps: @240V: 160A
TIG Amps @ Rated Duty Cycle: @240V: 200A/18V @ 60% Duty Cycle/ 40º C - 160A/16.4V @ 100% Duty Cycle/ 40º C
Stick Amps @ Rated Duty Cycle: @240V: 160A/26.4V @ 35% Duty Cycle/ 40º C - 130A/25.2V @ 60% Duty Cycle/ 40º C - 100A/24V @ 100% Duty Cycle/ 40º C
Max Inrush ( I1MAX ) Amps: 240V: 31A
Maximum Rated (I1EFF ) Input Amps: 240V: 23A
OCV: TIG: 68V - Stick: 68V
TIG Output Range DC: 240V: 5A-200A/10.2V-18V
TIG Output Range AC: 240V: 20A-200A/10.8V-18V
Stick Ouput Range DC: 240V: 5A-160A/20.2V-26.4V
Stick Function: Adjustable Arc Force Control
Stick Hot Start Type: Auto Adaptive Hot Start
6010/Cellulose Capable: Limited to 6011
Minimum Amp DC TIG Start: 5A
Minimum Amp AC TIG Start: 20A
TIG Start Type: HF & Lift TIG
Memory: No
End Amp Range: Fixed Minimum
Upslope Time: Fixed, Minimum
Down Slope Time: 0-25 Seconds
Preflow time: 0-10 Seconds
Post Flow Time: 0-25 Seconds
TIG Pulse: Yes
Standard DC Pulse Frequency: .5-150Hz
Standard AC Pulse Frequency: .5-150Hz
Pulse Time On (Duty Cycle): 10-90%
Pulse Amp Range: 5-95% of welding amps
AC Frequency (Hz): 20-250Hz
AC Balance Range: 30-70% of Electrode Positive
AC Wave Forms: Advanced Square Wave
Remote Control: 2T/4T
Foot Pedal: Upgraded NOVA Foot Pedal

Minimum/Maximum:

TIG:

Weld steel to a maximum of 5/16" single pass (240V)
Weld steel to a maximum of 3/16" single pass (120V)
Weld steel to a maximum of 1/2" multi-pass(240V)
Weld steel to a maximum of 3/8" multi-pass (120V)
Weld aluminum to a maximum of 1/4" single pass (240V)
Weld aluminum to a maximum of 1/8" single pass (120V)
Weld aluminum to a maximum of 3/8" multi-pass (240V)
Weld aluminum to a maximum of 1/4" multi-pass (120V)
Weld to a minimum of .007" Steel
Weld to a minimum of .020" Aluminum

Stick:

Weld with a minimum of 1/16" diameter electrode
Weld with a maximum of 1/8" diameter electrode (240V)
Weld with maximum of 3/32"-1/8" diameter electrode (120V)
Not Rated for E6010 Use

TIG limits are recommended based off of practical limits and industry recommended standards for single and multi-pass welds.

Stick min/mas recommendations are general and may vary between manufacturers and electrode types.

WHAT'S INCLUDED

Single Phase 240v Digital Ac/Dc Tig Machine
W/I Sr-26-4m Super Soft Red-hose Torch
400a Australian Style Electrode Holder
Yh16-3m Electrode Cable
300a Earth Clamp
Yh20-3m Earth Cable
Regulator
2m Pvc Gas Hose
FREE UPGRADED Nova Foot Control Pedal

OPTIONS

Power Cool 300 Water Cooler
ProCart 330
Foot Pedal
Amp Control Slider
Welder Cover
NOVA Welding and Fabrication Table
NOVA Clamp and Tool Kit
Air-cooled 9/17/26 series TIG torches
Water-cooled 18/20 series TIG torches
Amp Control TIG torches
TIG Consumables Kits

NOTES

240/120V adapter is included. Use only with generators certified by the manufacturer as "clean power". Use with clean power generators rated for at least 8500 Surge Watts.