Your Cart is Empty

PowerPlasma 82i - 3 PHASE



  • Lightweight
  • digital_display
  • igbt_equipped
  • 415v_3ph


The PowerPlasma 82i is really a plasma cutter in a class by itself.  When you consider the performance capability of the machine, design features and the price of the unit together, there really is nothing to compare it to.  Sure there are a couple of 80-90 Amp plasma cutters on the market, but hey, if you are on a budget, they aren't even close to what we offer in a machine this size when all things are considered overall.  Here's a few features that the PowerPlasma 82i has that that should get your attention:

  • Digital Controlled Circuitry. This means reduced components and increased reliability
  • A Digital Air Pressure Gauge.  You can precisely monitor air pressure fluctuations.
  • Digital Air Pressure Setting Guide.  Color Coded LED's eliminate guess work for best air pressure setting.
  • Super Bright LED display.  Read your settings a greater distance and in brighter lighting than any other brand.
  • Adjustable Post-Flow Control.  This allows you to be in charge of how long the air flows, reducing annoyingly and unecessarily long post flow time, reducing air consumption and noise levels from contantly running compressors.
  • Built in CNC capability.  (See our CNC package for the machine torch option)
  • Gouge mode for moderate gouging needs.
  • A Pilot Arc Tip saver function and a Auto-relight function allows you to choose the best mode of operation for to choose whether to maximize consumable life, or maximize cutting capability and speed on rusty/painted or expanded metal.
  • A Price that beats anyone.  You'll be hard pressed to find a 40 amp plasma cutter at this price from the other guys.


Please Note: This model of PowerPlasma 82i  is available and configured to operate on a 415V ~3 Phase input power. To achieve the maximum performance out of your Everlast Machine please ensure your current breaker and wiring/socket setup at your place of use is sufficient enough to achieve this. For example you may be required to upgrade your breaker to a 32A dedicated circuit to suit, therefore allowing you to achieve your machines full duty cycle. If in doubt please contact your local licensed electrician for more info prior to purchasing and please see terms and conditions/warranty for more information.

Manufactured and compliant with IEC60974.10, CE Guaranteeing your electrical safety and performance. INDUSTRIAL USE ONLY


Download PDF Manual HERE

In stock


  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial/Industrial class, 60% Duty cycle at 80 amps
  • Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals 
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • Adjustable post flow control up to 50 seconds to improve consumable and torch life
  • Front air pressure gauge allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • IGBT modules improve reliability and performance while reducing overall weight
  • CNC socket and CNC torch for plasma table use.


  • Type: IGBT
  • Voltage/phase: 220/240 V 1 Phase
  • Output Amp/Volt Range: 20-80A/88V-112V
  • OCV: 240V
  • Max Inrush ( I1MAX ) Amps: @ 240V: 58A
  • Maximum Rated (I1EFF ) Input Amps: @240V: 45.2A
  • Duty Cycle At Rated Amps/Volts: 60% @ 80A/112V - 100% @ 63A/105V
  • Arc Start Type: Blow Back (Piston type)
  • PilotArc: Yes
  • Torch Type: Italian designed iPT 80 machine torch (Hand torch not included)
  • CNC Interface Port: Yes
  • Adjustable Post Flow Timer: Yes
  • Gouging: Light to Medium
  • Recommended Cutting Air Pressure: 75psi
  • Recommended Compressor Capacity: 7CFM @ 90 psi/60 gallon tank
  • OK-to-Cut Indicator/Low Air pressure safety: Yes


  • Up to 5/8" daily use with CNC (rated for best cut speed and quality)
  • Up to 1" clean cut with CNC (edge start)
  • Up to 1 3/16" severance cut @ 3-5 ipm
  • Pierce up to 1/2-5/8" with auto THC


Plasma cutting capacity is affected by several factors.  Ideal cutting conditions require dry air, new consumables, proper air pressure etc.   Quality of cut depends upon consumable orifice size, standoff height,  and travel speed.


  • 25ft. Italian designed and patented iPT 80 CNC torch with Euro quick-connect central adapter
  • Work clamp with 10ft. cable and DINSE connector
  • Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
  • Consumable starter kit


  • ProCart 330
  • Welder Cover
  • NOVA Welding and Fabrication Table
  • NOVA Clamp and Tool Kit
  • iPT-80 Hand-held Plasma Torch, 15 ft
  • iPT-80 Hand-held Plasma Torch, 25 ft
  • iPT-80 Plasma Consumables Kits


A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.

If using with a generator, use a generator rated by its manufacturer as providing "clean power".  This is usually 5% or less THD (total harmonic distortion).

Use with a generator rated for at least a minimum of 15,000 surge watts.

This unit does not include a hand torch.