The IGBT inverter platform that the new Power i-MIG 200E is built on, delivers max power and performance at an economy-minded price level. The all new unit takes a no-nonsense approach just for those people that want "just a MIG" to take care of their welding needs. It features an all new full LCD Display for ease of use.
This All New 2021 Model Features the Power-Set Mode- Selection of Gas Type, Wire Diameter, Thickness/Thinness of Material
This is a significant improvement over many of the transformer based MIG welders on the market that offer limited, tapped settings which may be "too hot" or "too cold" for the weld application.
*This model runs an American software update meaning measurements are in imperial. Current pricing reflects this situation.
PLEASE NOTE: Everlast Welders Australia strongly recommends the use of a 15A RCD box between the machine and wall socket during use. To achieve the maximum performance out of your Everlast Machine please ensure your current breaker and wiring/socket setup at your place of use is sufficient enough to achieve this. For example you may be required to upgrade your breaker to a 32A dedicated circuit to suit, therefore allowing you to achieve your machines full duty cycle. If in doubt please contact your local licensed electrician for more info prior to purchasing and please see terms and conditions/warranty for more information.
Purchase the SM100N gun to weld Aluminum or purchase a .035"/.045" 1 piece drive roll kit to weld aluminum along with a polymer liner for the standard 10 ft gun.
If operating with a generator, use a generator rated for at least 7000 surge watts. Make sure that it is certified by the generator manufacturer to produce "clean power". The threshold for clean power is typically <5% THD (Total Harmonic Distortion). Operating on non clean power generators, poor sources of power, including under/over voltage (10% over/under voltage) or extension power cords that are undersized will void the warranty.
If welding aluminum, you must use .035" diameter wire for best results with main gun, U groove drive rolls (optional) and polymer liner (optional) or spool gun. Recommend spool gun is SM100(optional).