The PowerPlasma 82i is really a plasma cutter in a class by itself. When you consider the performance capability of the machine, design features and the price of the unit together, there really is nothing to compare it to. Sure there are a couple of 80-90 Amp plasma cutters on the market, but hey, if you are on a budget, they aren't even close to what we offer in a machine this size when all things are considered overall. Here's a few features that the PowerPlasma 82i has that that should get your attention:
Please Note: This model of PowerPlasma 82i is available and configured to operate on a 415V ~3 Phase input power. To achieve the maximum performance out of your Everlast Machine please ensure your current breaker and wiring/socket setup at your place of use is sufficient enough to achieve this. For example you may be required to upgrade your breaker to a 32A dedicated circuit to suit, therefore allowing you to achieve your machines full duty cycle. If in doubt please contact your local licensed electrician for more info prior to purchasing and please see terms and conditions/warranty for more information.
INDUSTRIAL USE ONLY
Plasma cutting capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speed.
A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.
If using with a generator, use a generator rated by its manufacturer as providing "clean power". This is usually 5% or less THD (total harmonic distortion).
Use with a generator rated for at least a minimum of 15,000 surge watts.
This unit does not include a hand torch.