How to Choose a Welder for Your Budget and Workshop | Buyer's Guide

How to Choose a Welder for Your Budget and Workshop | Buyer's Guide

Written by Stacy Smyth

Step 1: What will you weld most?

  • Mild steel fabrication, repairs, trailers, gates: MIG is fast and easy to learn.
  • Stainless, thin sheet, show quality welds: TIG gives the most control and the neatest finish.
  • Aluminium: you'll need an AC/DC TIG machine, or a MIG with the right spool gun or pulse setup.
  • A bit of everything: a multiprocess machine (MIG, TIG and stick in one) can make sense.

Step 2: What power do you have?

Most home and small workshops run on single phase 240V. Dual voltage machines such as the Cyclonei 212 and Typhoon 230 give extra flexibility. Bigger machines like the Typhoon 330 and PowerTIG 325EXT need three phase power. The PowerTIG 185DV and PowerTIG 210EXT are supplied with 15A Australian plugs, so you’ll need a suitable 15A outlet and circuit rather than a standard 10A household socket.

Other machines may require a higher-capacity single-phase circuit or three-phase power. Check the electrical requirements for the exact Australian model before buying, and have an electrician confirm your supply is suitable.

Dual-voltage capability refers to different input voltages; it doesn’t mean the machine can run at full output from any household outlet.

Step 3: Look beyond max amps

Max amps on the box is only part of the story. Also compare:

  • Duty cycle: how long the machine can weld at a given output before it needs to rest. A higher duty cycle matters for long welds and production work.
  • AC controls (for aluminium TIG): AC balance, frequency and waveform options give you much better control over cleaning and penetration.
  • Pulse: helps control heat on thin material and gives a neater finish.
  • Ease of use: clear controls and memory settings save setup time, especially when you're learning.
  • Local support, parts and warranty: the machine is only as good as the help you can get when you need it.

Good options by stage

Starting out / home workshop

  • Cyclone 140E: compact inverter MIG for home workshops and lighter fabrication.
  • PowerTIG 185DV: an entry level AC/DC TIG with simple controls, so you can learn on steel, stainless and aluminium.

Serious hobbyist or home workshop that takes on pro jobs

  • PowerTIG 210EXT: AC/DC TIG with advanced pulse and AC controls. Great value for home users and professional fabricators.
  • Typhoon 230: the machine Everlast recommends to most fabrication shops, with touchscreen controls, 230 amps of AC/DC TIG and dual voltage flexibility.
  • Cyclonei 212: a portable, dual voltage MIG/stick all rounder for workshop and site work.

Busy fabrication shop / production

For a home workshop that can grow into professional work, we’d recommend the PowerTIG 210EXT for TIG welding. Its AC/DC capability and advanced controls cover steel, stainless and aluminium, giving you room to develop without immediately needing to upgrade.

For a budget under $2,000, the PowerTIG 185DV is a strong entry-level AC/DC TIG choice. If general fabrication and MIG welding are the priority, consider the Cyclonei 212 instead. Check current pricing and package inclusions before ordering.

Still not sure?

Talk to someone who actually uses the gear. Everlast's team puts every model to work in its own fabrication shop. Call (03) 8593 7509, or use Compare the Range to see the models side by side.

SHOP BY CATEGORY

Everything in the range

View All Products