Is a Handheld Laser Welder Worth It? A Guide for Australian Workshops
What a handheld laser welder actually does
A handheld laser welder uses a focused fibre laser beam to melt and join metal. The heat goes into a very small area, so there's less heat spreading through the part. That's why laser welds are known for less distortion and less clean up afterwards.
The Everlast RedSabre range goes one step further. Models such as the RedSabre 1500 and RedSabre 2000 are laser welder, cleaner and cutter machines. One unit can prep the surface, weld it and trim it.
Is laser welding faster than TIG?
For many jobs, yes. Laser welding typically has a much faster travel speed than TIG, especially on thin and medium sheet in stainless, mild steel and aluminium. Because less heat goes into the part, you also spend less time straightening, grinding and polishing afterwards.
That said, TIG is still a great process. For very thick sections, some root passes, or jobs where you need filler control on unusual joints, many shops keep a TIG machine alongside the laser. A laser welder adds speed and consistency; it doesn't have to replace everything else.
When does a laser welder save money?
A laser welder tends to pay off fastest when your workshop:
- welds a lot of thin to medium sheet (stainless benches, enclosures, brackets, signage, trailers, ducting)
- spends a lot of labour on grinding, straightening or polishing after welding
- does repeat jobs where consistency matters
- minimal consumables required
- struggles to find experienced TIG welders, since laser welding is quicker to learn for many operators
A good way to judge it: add up how many hours a week go into welding plus post weld clean up and think about how much of that a faster, lower heat process would save.
Can I run a laser welder on single phase power?
Yes, many models run on single phase. The RedSabre 550, 750, 1300, 1500, 2000, 1500X and 2000X all run on 240V single phase power. The 3000X and 6000 are 415V three phase machines for heavier industrial work. Always check the electrical requirements for your exact model before ordering. Single phase units require a 32A circuit.
How thick can a handheld laser welder weld?
It depends on the model and the material. Maximum weld thickness (mild steel / stainless / aluminium):
- RedSabre 550 and 750: 2 / 2 / 1.0 mm
- RedSabre 1300: 4.5 / 4.5 / 3 mm
- RedSabre 1500 and 1500X: 6 / 6 / 4.5 mm
- RedSabre 2000 and 2000X: 8.0 / 8.0 / 6 mm
- RedSabre 3000X: 8.0 / 8.0 / 6.5 mm
- RedSabre 6000: 12.0 / 12.0 / 8.0 mm
Most small fabrication shops find the single phase 1500 to 2000X models cover the bulk of their sheet and light plate work.
Cheap imported laser welder vs one with Australian support
You'll find cheaper laser welders online. Before you buy, ask a few practical questions:
- Who do I call when something goes wrong? A laser is a serious industrial tool. Local phone support from people who use the gear matters.
- Can I get consumables and parts quickly? Nozzles, lenses and protective windows are regular use items. Everlast keeps laser consumables in Australia.
- Is training and safety covered? Handheld lasers are Class 4 laser systems. Proper setup and operator training aren't optional.
- Can I see it working first? Everlast runs demos at its Carrum Downs, Victoria showroom.
The cheapest machine to buy isn't always the cheapest machine to own, especially if it's sitting idle waiting for a part.
What safety setup does a laser welder need?
RedSabre machines are Class 4 industrial laser systems. They need a controlled work area, laser screens or enclosures, interlocks, wavelength rated laser eyewear, protective clothing, fume extraction and trained operators. The safety setup needs to be assessed for each workplace. Everlast supplies in house training along with an Everlast training package covering machine operation, setup and safety.
Is it worth it for your shop?
If you weld a lot of sheet, lose hours to grinding and straightening, or want to take on work faster, a handheld laser welder is well worth a serious look. The best next step is to see one working on your own material.
Book a demo or talk to a real welder: call (03) 8593 7509 (Mon–Fri, 8am–5pm AEST), visit us at 3 Enterprise Circuit, Carrum Downs VIC, or browse the RedSabre laser welder range. Business finance is available. See finance options.
Quick answers
Is a laser welder worth it for a small workshop?
Often, yes, if you weld a lot of thin to medium sheet or spend a lot of time cleaning up welds. The time saved on welding and finishing is where it pays off.
Can a laser welder replace TIG?
For a lot of sheet work it can take over most of the welding, but many shops keep a TIG machine for thick sections and specialty jobs.
Can a laser weld aluminium and stainless?
Yes. RedSabre machines weld mild steel, stainless and aluminium. Maximum thickness depends on the model (see above).
